Tech specs - Searocco 1500
  sr150015 meter seagoing motor yachttechnical specifications to CE-A Classprice list and options.

Use the menu below to jump directly to an specific item.
  Building specifications  
  Dimensions (l x w x draft) 14,97m x 4,94m x 1,30m  
  Air draft 3,45  
  Displacement 30 tons  
  Standing headroom insteering position approx. 2,05m  
  Standing headroom in saloon approx. 2,05m  
  Standing headroom in guestcabin approx. 1,95m  
  Standing headroom in owner’scabin approx. 1,95m  
  Construction material

hull in blasted steel, super-structure in seawater resistant aluminium ALMG 4.5 MN

  Material thickness 6-5-4 mm  
  Keelson 70 x 40 mm  
  Hull shape round-bilged with flared bow and three watertight compartments  
  Engines 2x Volvo Penta  
  No. of cylinders 4  
  Power/RPM/speed 180 PK/2800/10.5 kn  
  Consumption at cruisingspeed  approx. 18 litres/hour  
  Reverse reduction gear HS45H reduction 2,5:1  
  Propeller (number of blades,diameter, pitch) 4 – 25– 20"  
  Stabilisers Koopnautic hydraulic  
  Fuel tanks capacity 4.800 litres  
  Day tank fuel capacity 200 litres  
  Freshwater tank capacity 850 litres  
  Waste water tanks capacity 350 litres  

Technical specifications

Entire paint treatment.

Hull interior and exterior:
Blasted and coated with Sigma Epoxy Universal primer.

Extra treatment below waterline:

- 1 layer Acraton HS-U high solid epoxy primer (extra saltwater protection);

- 2 layers antifouling in brick red.

- Engine compartment fully treated.

Hull above waterline: 

- 3-4 layers epoxy primer-base;

- 2-3 layers epoxy finishing primer; 

- 2 x 3 cross-layers Awlgrip 545 epoxy primer/undercoat;

- 4 cross-layers Awlgrip topcoat (choice of Flag Blue/Aristo Blue/Royal Blue/Jade Mist Green)*;

- finished off with waterline stripe in superstructure colour choice*



- 3 layers epoxy primer-base;

- 2-3 layers epoxy finishing primer;

- 2 x 3 cross-layers Awlgrip 545 epoxy primer/undercoat (choice of Oyster White/Off White/Matterhorn White/Egg Shell White/Grey Stone/Pearl Grey)*

- forepeak superstructure and fly bridge with non-slip coating.


* Other colours available subject to surcharge.


GEBO windows

- 12 fixed windows with lightly tinted insulation glass and Thermic Line profiles (thermal barrier).

- 5 folding windows in wheelhouse with clear insulation glass and Thermic Line profiles.

- 8 anodised spherical portholes with lightly tinted glass.

- 7-part fly bridge windscreen with lightly tinted glass.

- 1 ventilation/escape hatch in guest cabin with lightly tinted glass.


Guardrails and deck fittings

Teak rails run around virtually the whole boat and the bulwark around the saloon coachroof has a teak grab rail.The following parts are in polished stainless steel 316 (seawater resistant): flagpole, stanchions, bollards, cleats, 4 handrails, 2 bathing platform grabs, ladder to saloon coachroof. Anchor base with bow protection and fendering in stainless steel 316. 

Noise level/insulation

Noise level 1800 revolutions
(ca. 9 kn)
max. 2500 revolutions
Wheelhouse 55 dB 62 dB
Deck saloon 57 dB 65 dB
Owners cabin 56 dB 64 dB


1400 special anti-vibration plates in paste

The spaces between the panelling of skin, decks, gangways, forepeak bulkheads and interior walls are filled with polyurethane insulation foam, minimum thickness 35 mm, fire class B2. All floors are suspended on acoustic foam strips.


Anti-drumming vibration insulation is fitted in:

- engine compartment deckhead

- engine compartment forward and aft bulkheads

- skin above floor in engine compartment

- skin above floor 2 frame spaces fore and aft of engine compartment

- tops of oil tanks

- tank walls of both fuel tanks in engine compartment

- skin above propeller.

Engine compartment insulation

- acoustic foam adhered to engine compartment deckhead

- suspended floor covered on underside

- acoustic foam strips on outer side of bulkheads

- bulkhead tack bolts covered on inner side;


Interior and finish

- Teak woodwork with solid mouldings and skin insulation.

- H.P.L.Ceilings.

- Upholstered saloon and dinette seats.

- Slatted bed bases in owner’s and guest cabins.

- Floor covering in saloon, cabins and on steps.

- Solid oak block parquet in steering position and kitchenette.

- Brass coloured press-button locker door closures.

- Brass door furniture.

- Saloon and dinette table secured for sea-going.

- 2 helmsman’s seats.

- Brass halogen interior lighting with wall switches.

- Flexible halogen reading light at steering position.

- 2 Searocco armchairs

- Wempe clock, barometer and comformeter

- Cantalupi brass wall-lights

Approximate estimate of € 7,500.00 for:
Floor covering, curtains and seating upholstery.

Searocco armchairs




Two Koopnautic stabilisers for a comfortable ride:
SeaRocq 1522 consisting of:
- hydraulic pump
- oil reservoir
- two control valves
- two actuator units
- two fin blades
- Gyrosens roll sensor
- electronic control systems




- video monitoring of engine room, flybrigde camera for stern view, underwatercamera, with monitor (colour) in wheelhouse.
- 110 litre refrigerator with freezer compartment

- Dishwasher

- Microwave oven (Whirlpool)

- Stainless steel 220V/110V ceramic hotplate

- Washer/drier

- Extractor hood (Whirlpool)

- Square stainless steel sink in kitchenette

- Two electric toilets with freshwater flushing

- Built-in hand basins Villeroy and Boch with locker units in bedroom

- Complete luxury showers with trays tiled

- Sanitary ware and towel design radiator

- Three Exalto electric windscreen wipers with 3-position interval and wash/wipe facility

- Electric anchor windlass with galvanised 48 kg Pool-N anchor and 70 meters with 10 mm diameter link chain.

- Complete sea-going equipment: 2 lifebuoys, four mooring warps (two 15 meter and two 10 meter), two 5 meter springs and six fenders

- Two powder extinguishers to CE classification A: 2 of 2 kg suitable for class ABC fires
- Fire protection in engine room
- 2 Sharp LCD TV
- Satellite television
- Radio with 2 speakers in wheelhouse
- Radio/CD player with 4 speakers in saloon


video surveillance (colour) for stern view, engine room and underwater

LCD TV, wegklapbaar
LCD tv




- Two Easy Stern propeller shaft installations complete with 4-bladed propellers.

- Zinc anodes (suitable for fresh and salt water). 

- Hydraulic steering system.

- Volvo Penta EC electronic engine control for wheelhouse and fly bridge.

- Double prop BP1200 24V 7kW electric QL bow thruster with two touchscreens. Fuel tanks: total fuel capacity 5,000 litres with algae filter, one being a 3mm stainless steel day tank with sight glass.

- All tanks are fitted with inspection covers/manholes. All fuel tanks are coupled together by manifolds (for trimming). All return lines go to day tank fitted with high/low level alarm.

- Each tank has an electric level gauge with display in wheelhouse. Complete double filter system to CE class A.Hot and cold water system 850 litres in 3mm stainless steel 316 tank fitted with inspection hatch and gauge.Two waste water tanks of 20 and 350 litres in 3mm stainless steel 316 fitted with inspection hatch.Bilge pumps: each compartment has one electric bilge pump with alarm (3 in total).

- qty. 2, 3-arm hawser stripper's

motor 2

digitale aflezer brandstoftanks
digital readout fuel tanks

hawser stripper

propeller shaft generator





The entire electrical system using diagrams and the wiring using numbered cabling  
- 24/12 V-system
- 220 V-system
- alarm systems
- distribution boxes and group boxes
- 7kW generator ONAN (1500)
- 24V/5000W converter
- 75 Amp battery charger
- total battery capacity 24V/1600 Amp



Airconditioning / climate control / ventilation / watermaker

- Kabola B12 combi boiler with radiators.

- Dorade vents in bathrooms and owner’s cabin.

- Engine compartment controlled by over-pressure ventilation (24V, capacity 2,000 m3/hour)
- Regulation of the airconditioning by room
- Watermaker



- Control panels for engines (wheelhouse and fly bridge).
- Digital meters for fueltank.
- Meters for watertanks.


Electro-hydraulic crane on flybridge (250 kg)

Navigation instruments: "Raymarine"

Inboard steering position 

- radar (open radar scanner) 4 kW with 15" screens and separate keyboard.
- C-map with 15" screen and separate keyboard.

- wind meter

- compass display

- depth meter

- combi: speed, log, depth, wind and navigation

- autopilot operating panel

- Epirb

Outboard steering position fly bridge
- windmeter
. compass display
. depth meter
. combi: speed, log, depth, wind and navigation 
- autopilot operating panel
- VHF connector point


- Electro-hydraulic crane on fly bridge (250 kg).
- Folding radar mast.
- Teak laid bathing platform, aft deck, gangways, foredeck and flybridge
- Lighting in coachroof overhang gangways and fore deck.
- Adjustable flybridge seats
- Besenzoni gangway


Price & Payment terms

The price for the Searocco 1500 from € 695,000.-- excl. VAT.

Payment terms
10% begin building
20% begin blasting and coating
70% on final handover

Subject to price alteration up to the time a written contract of sale is entered into.
All our supplies are made under HISWA terms and conditions of sale.